ORD-0008
In buildACME
PO: ACM-2403
1×
Part ID
Every part carries the same identity from order to dispatch — no rekeying, no orphans.
MES for additive manufacturing bureaus
Run the floor.
Ship the parts.
adMES is the manufacturing execution system built for additive manufacturing bureaus. One system for orders, parts, builds, post-processing and delivery — instead of spreadsheets, sticky notes and three different Slack threads.
In private beta. Expect the odd rough edge while we harden it — and, as a founder member, a real say in what we build next.
Built for mid-size bureausProcess-agnostic · configure your own pipelineBuilt by additive manufacturing operators
Search by order ID or PO…
AllOpenIn build
ORD-0006
OpenBlue Sky Aerospace
PO: BSA-4409
ORD-0004
OpenVertex Medical Devices
PO: VMD-9918
ORD-0002
OpenAcme Robotics Ltd
PO: PO-2026-0055
1 part ID · intake → shipEvery stage change recordedPer-part history & auditPrivate beta · invite only
Why bureaus break
Bureaus don’t fail at printing. They fail at tracking.
Where your parts live today
A typical 30-printer bureau juggles five processes, eleven materials and forty customers. The machines work. The systemdoesn’t.
✗An order spreadsheet · two versionsLast edit · 14h ago
✗WhatsApp with the shipping desk312 unread
✗Sticky notes on the post-processing bay11 visible
✗A folder of build files on the print PC~2.4 GB
✗Slack channel #parts-please86 threads
▸adMES — one system, one part ID, end to endv 2.4
01 / ProductOne ID. Five stations.
One ID. Five stations.
From order in to part out.
Every part gets a single identity the moment it enters your bureau, and keeps it through every stage, every build, every delivery note. That’s the whole product, in one sentence.
Floor diagramRev 02 · ASheet 01 / 01Scale 1 : 1
01 / Order
Intake
Orders, customers and files — every part stamped with a single ID before it touches a printer.
42orders open
02 / Build
Planning
Group parts into builds, assign the printer, record the material. Failed prints roll back or keep their survivors.
14builds active
03 / Post
Processing
Wash, cure, blast, dye, assemble — your own pipeline stages. Filter by stage, advance parts, route re-work back a step.
87parts queued
04 / Stock
Ready
Parts that clear every stage land in stock — eligible for a delivery note, with their build and processing history intact.
11in stock
05 / Ship
Outbound
Build a delivery note, print the pack list, share a link. Shipped quantities tracked; the order closes itself.
9 / 12shipped today
5/5
Stages connected
Intake, build, post-processing, stock, ship — every stage change is recorded as the part moves.
0×
Spreadsheets needed
The system replaces them by being faster, not by demanding more typing.
02 / Features
Built around the way real bureaus actually run.
Six modules, one schema. They share a part ID and a customer record, so the floor never argues about which number is correct.
01 / Intake
Order intake
Capture customers, orders and parts. Upload the 3D file, set quantity, due date and price — or bring it all in by CSV.
STL · OBJ uploadPO referenceCSV import
02 / Planning
Build planning
Group parts into builds, assign the printer, and record the material and packing density — without leaving the page.
Printer assignmentMaterial & densityMax-dimension fit check
03 / Floor
Builds & failure capture
Track every build and where each part sits in the pipeline. When a print fails, roll the parts back or keep the survivors — your call, with the reason recorded.
Build statusFailure captureScrap & reprint
04 / Post
Post-processing pipeline
Wash, cure, blast, dye, assemble — configure your own stages. Filter the floor by stage and advance parts as they move.
Configurable stagesPer-stage filteringRe-work routing
05 / History
Per-part history
Every part keeps one ID with its build, material and full processing history — including scraps and reprints — plus a reference photo.
Per-part historyScrap / reprint auditReference photo
06 / Ship
Delivery notes & dispatch
Build delivery notes from in-stock parts, print a pack list and share a link. Shipped quantities are tracked and orders close themselves when fully dispatched.
Delivery notesPrintable pack listShareable link
03 / Compatibility
Whatever you print, on whatever you print it.
adMES is process-agnostic. It doesn’t care which logo is on the front of your printers — set up your machines, materials and pipeline stages to match your floor, whatever you run.
FDM
Fused deposition
PLAPETGABSPA-CF
SLA
Resin / DLP
ToughClearCastableBio
SLS
Powder bed
PA11PA12TPU
MJF
Multi-jet fusion
PA12PA12-GBTPU
DMLS
Metal LPBF
316LTi-6Al-4VAlSi10Mg
+
Your other rigs
CustomHybridBespoke
Deep dive · Per-part history
Every part keeps its history.
Trace any part through its build, its material and every stage it passed — including the scraps and reprints. The whole story on one page, whenever you need it.
- 01One part ID across order, build, processing and delivery.
- 02Build and material recorded for every part.
- 03Scrap and reprint history kept, with the reason and timestamp.
- 04A reference photo attached per part.
Parts · PipelineToday · 06 : 34
P-44210-ARidge Aero · bracket v3in stock
P-44210-BRidge Aero · bracket v3in stock
P-44211-AHexlab · gripper armprocessing
P-44211-BHexlab · gripper armin stock
P-44212Northform · housingscrapped
P-44213-AStrata Bio · clipin stock
P-44213-BStrata Bio · clipin stock
P-44214Velocade · spacerprocessing
04 / Pricing
One setup. Then half-price for a year.
One implementation fee gets you set up and configured to your floor. Founder members lock in 50% off the standard monthly subscription for a full 12 months, while adMES is in private beta.
Founder members · private beta
50% off your subscription for 12 months
Honest note · private beta
adMES is in private beta. Expect the occasional rough edge and steady changes while we harden it — that’s the trade for founder pricing. In return you get a direct line to the team and real say in the roadmap: the features you ask for are the ones we build next.
Implementation
£2,500£999
one-off · limited-time offerSubscription
£1,200£600/ mo
first 12 months, then £1,200 / mo- Your own private, audit-logged workspace
- Configured to your process pipeline and printers
- Unlimited operators & customers
- Role-based access & permissions
- Training for your team
- A direct say in the product roadmap
- Bug fixes, small features & a monthly check-in
- All your data, exported on request
Standard pricing scales with weekly part volume — we’ll confirm your numbers on the call.
Join the waitlist→All plans include the dark and light app themes · need something custom?
Private beta · invite onlyJoin the waitlist.
Join the waitlist.
Get invited to the private beta.
We’re onboarding new bureaus by hand. Join the waitlist and we’ll be in touch to map your floor in adMES — with 50% off your subscription for 12 months as a founder member.
Emailhello@admes.io
Phone01252 950 105
No card to join50% off for 12 monthsHands-on onboarding